date: company: customer signature printed name phone no: fax no: acceptance of drawing accepted with deviations listed do not scale from this print .835 ref 21.21 .105 ref 2.67 .212 5.38 ref .040 ref 1.02 (typ) .735 18.67 .035 0.89 ref "a" "a" 1 2 item no. part number quantity material 1 qmss-26-05.75-d-01 1.0000 vectra e130i, color: black 2 asp-129634-01-b 1.0000 vectra e130i, color: black 3 asp-129635-02-p-s 52.000 phos bronze, 521 extra spring temper 4 asp-129636-02-p-l 1.0000 phos bronze, 510 full hard temper 5 k-500-300 1.0000 polyamide film (kapton) 6 ty-asp-088 .01786 anti-static black hips .009 ref 0.23 .835 21.21 (((26 pos/ 26) x .840[21.34]) - .005[0.13]) .286 7.26 ref .625 15.88 25 eq spaces @ .0250[.635] .090 2.29 ref .216 5.49 ref .295.020 7.480.51 c1 c2 5 01 02 .035.020 0.890.51 polarization notches c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] elevated qms assm by: ASP-129637-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 12/12/2006 2 1 sheet scale: 2.5:1 c:\enterprisevault\dwg\misc\mktg\ASP-129637-01-mkt.slddrw plating: contact area: .000030 gold over .000050 nickel remainder: .000200 ref tin over .000050 nickel notes: 1. .342 stacker height not available as standard. 2. represents a critical dimension. 3. burr allowance: .0015[0.038] max. 4. minimum pushout force: signal: .5 lb, ground: 1 lb. 5. max variance of .002[0.05]. 6. dimension applies to contacts & ground planes. 7. ground plane press height must be .003[0.08] less than the max height or .001[0.03] greater than the minimum height of the terminal. 8. parts to be packaged in trays. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision a
.3420 - .0020 + .0040 8.688 - 0.05 + 0.10 (see notes 5, 6, & 7) .1150 - .0010 + .0040 2.921 - 0.03 + 0.10 (measured terminal to terminal) .010 ref 0.25 .347.004 8.810.10 .022 ref 0.56 .296.006 7.520.15 section "a"-"a" scale 5 : 1 c4 c5 c6 4 3 (see note 6) .004[0.10] .3420 - .0020 + .0040 8.688 - 0.05 + 0.10 (see note 5) in-process .004[0.10] .735 18.67 .016 0.41 .025 (typ) 0.64 .320 8.13 .680 17.27 .625 15.88 .020 0.51 .046 npth 1.17 (typ 2 plcs) .075 1.91 .055 1.40 recommended pcb layout c l 01 02 (all dimensions are symmetric about the centerline) c5 c6 sheet of elevated qms assm by: ASP-129637-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. clay w 12/12/2006 2 2 sheet scale: 5:1 ASP-129637-01 c:\enterprisevault\dwg\misc\mktg\ASP-129637-01-mkt.slddrw revision a 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
